MIXING & EFFECTS

Fruity Chorus

Fruity Chrorus is an FL Studio exclusive plugin developed by Smart Electron:x.

Parameters

• Delay - Sets the minimal delay of the delay-line inside the flanger. The flanger delay will be swept between delay and delay+depth. Range: 0 to 20 milliseconds. For 'deep' flanger effect you should set this parameter to low values.
• Depth - This controls the range of the flanger action. The flanger delay will be swept between delay and delay+depth. If you set this value to zero, the flanger will remain 'static' as the delay will stay constant. Range: 0 to 20 milliseconds. Setting this parameter to high values will create special effects and heavy modulation.
• Stereo - Use this control to widen the stereo image. If it's set to 0, the LFO on the left and right channel will be in perfect synchronization. At 180 degrees the left and right channel will be 100% out of phase. This means that the left channel will reach it's maximum when the right channel is at minimum. Range: 0 to 360 degrees. Try setting 10 degrees for subtle stereo enhancement.
• LFO 1 Freq / LFO 2 Freq / LFO 2 Freq - Sets the LFO-s modulation speed.
• LFO 1 Wave / LFO 2 Wave / LFO 3 Wave - Waveform of the LFO. Multi-sin is a mix of a normal
  sine wave with a sine wave at three times the speed.
• Cross Type - This parameter defines whether the plugin works on the lower or higher frequency part of the signal. Process HP processed only high frequencies, Process LP processes only low frequencies.
• Cross Cutoff - Cutoff frequency of the cross-over filter.
• Wet Only - If you use the chorus as a send effect you switch this parameter to mix the pure "wet" output with the source sound.

Plugin Credits: Smart Electron:x